Kit Suspension Combine Fileté Compatible pour Mini R50, R53 R52 Convertible Cooper Cooper S

Introduction

MXR-B2 coil-overs are designed as entry-level for street use. It features height adjustable and adjustable camber plates (applicable for some vehicles), which offer you a lowered stance, and improved performance for your daily use vehicle.

Application

Compatible pour MINI R50, R53 Cooper (06/2001-09/2006 compatible pour FWD
Compatible pour MINI R50, R53 Cooper S (06/2001-09/2006 compatible pour FWD
Compatible pour MINI R50, R53 S Works (06/2001-09/2006 compatible pour FWD
Compatible pour MINI R50, R53 Works (06/2001-09/2006 compatible pour FWD
Compatible pour MINI R50, R53 One D (06/2001-09/2006 compatible pour FWD
Compatible pour MINI R50, R53 One (06/2001-09/2006 compatible pour FWD
Compatible pour MINI Convertible (R52) Cooper(07/2004-11/2007)Compatible pour FWD
Compatible pour MINI Convertible (R52) Cooper S (07/2004-11/2007)Compatible pour FWD
Compatible pour MINI Convertible (R52) Compatible pour John Cooper Works(07/2004-11/2007)Compatible pour FWD
Compatible pour MINI Convertible (R52) One(07/2004-11/2007)Compatible pour FWD

Specification

Front top mount: Pillow ball
Rear top mount: OE top mount required
Damping adjustable: Not available
Camber adjustable: Not available
Height adjustable: Yes, lowering 25-75mm depending on the vehicle models
Front Spring Rate: 6 kg/mm (336 lbs/in)
Rear Spring Rate: 6 kg/mm (336 lbs/in)
Front spring inner diameter: 70.5 mm
Rear spring inner diameter: 70.5 mm
Spring length Front: 180 mm
Spring length Rear: 180 mm
Spring Preload advised: 7-10 mm
Damping rod diameter Front: Φ 22 mm
Damping rod diameter Rear: Φ 12.5 mm
Damping thread Front: M55×2 mm
Damping thread Rear: M55×2 mm
Twin -tube Diameter Front: 55 mm
Twin -tube Diameter Rear: 55 mm
Rod End Thread Front: M14×1.5 mm
Rod End Thread Rear: M12×1.25 mm
Front Collapsed Length: 375 mm / 14.76"
Front Extended Length: 465 mm / 18.31"
Rear Collapsed Length: 405 mm / 15.94"
Rear Extended Length: 465 mm / 18.31"
Color: Golden body with black spring

Package included

Package included：
2x Front coil-overs
2x Rear coil-overs
2x C spanners
2x Brake line brackets

Dimension

Package Size: 62*50*20 cm
Weight: 25900 g

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models)which allows a lower center of gravity and also add a more aggressive stance

2. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent

3. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response.( for some models)

4. CNC machined Aluminum top mounts and lockers-- - excellent strength, and save weight

5. Heavy‑duty steel lower mounts designed for secure installation.

6. High tensile spring--- 300,000 times continuously test to assure its high tensile strength.

7. All inserts come with pre-fitted long rubber boots for enhanced damper protection against dust, dirt, and debris.

8. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions

9. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Note

1. All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.

2. Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation. Any loose nuts, bolts, or locks will cause noise. Do check and tighten before serious problems happen.

3. Impact wrench is prohibited during the installation, it will loosen or damage the product.

4. Examine the clearance between tires and suspension. ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers. Caution: It is not sufficient with torsion beam trailing arm axles)

5. Regular maintenance is recommended for the coil-over. Applying WD-40 or a suitable protective spray every 3–4 months can help keep the components clean and moving smoothly.